Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Does anyone know the simulators of analog signals (0-20mA), so I can precisely control the value of the signal?

Created by: Bill1777 at: 7/29/2011 10:42 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

7/29/2011 10:42 AM	Rate (0)
Bill1777 Posts: 223 Rating: (4)	Does anyone knowthe simulatorsof analog signals(0-20mA), so I canprecisely controlthe value ofthe signal (for example7 mA)? I need test/simulates7-1200 analog input...
Bill1777 Posts: 223 Rating: (4)
Suggestion To thank Quote Answer

7/29/2011 12:39 PM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 12/28/2025 Posts: 4434 Rating: (1487)	Hi, some multitester (voltimeters) has this fuctions. I don't know if SIEMENS has something about that. Maybe you find something here www.fluke.com
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

7/29/2011 12:46 PM	Rate (0)
Bill1777 Posts: 223 Rating: (4)	tks
Bill1777 Posts: 223 Rating: (4)
Suggestion To thank Quote Answer

7/29/2011 12:48 PM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 12/28/2025 Posts: 4434 Rating: (1487)	You are Wellcome Other tip (I know that is obvius): you can use a analogical output of your plc to simulate a input...
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jacques-Olivier

7/30/2011 3:57 AM	Rate (0)
primus 1 Posts: 45 Rating: (4)	Hello Take a look at the link below. They have a couple ofmilliamp simulators. http://www.plctrainer.net/ Have A Good Day Tom
primus 1 Posts: 45 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on