Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

index register

Created by: Ratan at: 8/31/2011 10:38 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/31/2011 10:38 AM	Rate (0)
Ratan Experienced Member Joined: 12/7/2010 Last visit: 1/12/2026 Posts: 94 Rating: (0)	Dear friends how can i use index register i have created a DB1.DBW0 to DB1.DBW20. then if i increment a tag of INT, it should point memory DB1.DBW0 then DB1.DBW1 then DB1.DBW2 so on ....

Suggestion To thank Quote Answer

8/31/2011 11:57 AM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 1/14/2026 Posts: 4447 Rating: (1487)	Hi, How PLC you program? (S7-1200?) How language do you use? (LAD, STL, SCL?)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

8/31/2011 5:35 PM	Rate (0)
Ratan Experienced Member Joined: 12/7/2010 Last visit: 1/12/2026 Posts: 94 Rating: (0)	i am using S7-1214 DC/DC/DC and using LAD. Attachment DVP-PLC-Program_O_EN_20101119 58.pdf (768 Downloads)
	Last edited by: Ratan at: 8/31/2011 6:23 PM i have attachment for reference
Suggestion To thank Quote Answer

9/5/2011 1:22 PM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 1/14/2026 Posts: 4447 Rating: (1487)	Hi, at this momment, the better that i could suggest you is to use FieldRead/FieldWrite instructions (at Basic instructions, Move operations).
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on