Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Licence key

Created by: nadeem at: 10/8/2011 2:57 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

10/8/2011 2:57 PM	Rate (0)
nadeem Posts: 49 Rating: (0)	Hi I need help regarding Simtac manger version 5.4 licence key, i missed the key and when i run the program, it gives message "NO VALID LICENCE KEY FOUND, THE APPLICATION WILL BE CLOSED" so where i will find the key ? and Is it possible to use the trial licence key? Regards Nadeem
nadeem Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

10/8/2011 6:37 PM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	nadeem Hi I need help regarding Simtac manger version 5.4 licence key, i missed the key and when i run the program, it gives message "NO VALID LICENCE KEY FOUND, THE APPLICATION WILL BE CLOSED" so where i will find the key ? and Is it possible to use the trial licence key? Regards Nadeem Dear Nadeem If you have missed the licence key then it is not possible you will have to buy a another one. If you have the licence key 14 digit key which is present in the licence certificate, then you can call your local siemens support for help to give you a new licence. But i have a question can you where did you miss your licence key As far as you can use the trial licence for 15 days only after that it will ask you for another one. Have fun...
	Jazz
Suggestion To thank Quote Answer

10/9/2011 2:16 AM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 8/31/2025 Posts: 4522 Rating: (843)	Tagolover ........... As far as you can use the trial licence for 15 days only after that it will ask you for another one. ............. Hello, Just a small correction. Trial licence can be used for onlt14days from the moment of first start. Please check this FAQs: What is the difference between authorizations and license keys? What should you take into consideration when using STEP 7 in conjunction with the Automation License Manager? Which version of ALM you are using? And do you see the licenece key using ALM? If yes did you check it? If it is corrupted licenece,please check this link. Why does a message appear in STEP 7 stating that there is not a license key present even though the relevant license key is installed? Hope this helps.
	Last edited by: Ayman Elotaify at: 10/9/2011 2:20 AM Ayman Elotaify
Suggestion To thank Quote Answer

10/10/2011 7:20 AM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	How can you recover defective licenses and authorizations?

Suggestion To thank Quote Answer

10/13/2011 1:34 PM	Rate (0)
nadeem Posts: 49 Rating: (0)	Thanks for all to resolve the issue of liecense key, i got the floopy disk and run ,the license is there and software is working One more question i want to ask that when we transfer the key from floopy drive to C or D drive, the key is still floppy drive or not while it is the floating license key and what is the procedure to keep it in floopy in case of lost? Regards Nadeem
nadeem Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

10/13/2011 1:56 PM	Rate (0)
MM1234 Posts: 270 Rating: (53)	Hello nadeem, I don't think there is difference in way that floating or any other licence is transfered to the PC. FAQ says to transfer it back before formatting the drive etc., so I would really go with it. I don't know about exact protecting in case of loss, but when you have the licence number of your product, you should be able to recover it from Siemens support in case of corruption/loss due to some hw crash etc. (at least from my observation)
MM1234 Posts: 270 Rating: (53)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on