Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Adding Variables into Alarm Messages

Created by: Johnny D at: 11/9/2011 12:28 PM (1 Replies)

Rating (2)

Thanks 2

2 Entries

11/9/2011 12:28 PM	Rate (0)
Johnny D Posts: 9 Rating: (0)	Hi, Does anyone know if there is a way in TIA Portal of configuring an alarm to contain a variable from a tag in the message. For example in WinCC Flexible you could complete the following: "Text Information <tag tag_name> " if the value of tag_name was an integer for example its value would be displayed in the message. As soon as you began typing <tag in the discrete alarm text field it pulled up a box that would allow the tag to be specified. I am using a KTP600 color screen in TIA Portal and it does not seem to behave as per WinCC Flex. Any help would be appreciated Cheers John
Johnny D Posts: 9 Rating: (0)	Last edited by: Johnny D at: 11/9/2011 12:28 PM
Suggestion To thank Quote Answer

11/9/2011 3:10 PM	Rate (2)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 12/30/2025 Posts: 4435 Rating: (1487)	Hi, take a look at: " Sample Program: Dynamic values in the HMI alarm messages text./tf/WW/en/Posts/65325#321031 "
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users jacques-olivier_fr SergioToro

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Alarms Messages

Follow us on