Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

I can't see wincc component in STEP7 hardware configuration

Created by: BMP at: 10/18/2011 12:44 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

10/18/2011 12:44 PM	Rate (0)
BMP Posts: 36 Rating: (0)	hellow everyone, I am going to ask one silly question bcoz i don't much know about STEP7 software. When I open simatic manager It gives a pop up of Required software package. Under it WinCC(Object component manager) status: not installed. I installed WinCC 7.0 with WinCC expert package, AS-OS Engineering and WinCC configuration tools. I am using STEP7 5.5 + sp1.I can't see WinCC applications in Hardware configuration of step7. So what can I do? Regards, BMP
BMP Posts: 36 Rating: (0)
Suggestion To thank Quote Answer

10/18/2011 12:48 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Do you have Sp2 of WinCC 7.0 installed there?

Suggestion To thank Quote Answer

10/19/2011 7:24 AM	Rate (0)
BMP Posts: 36 Rating: (0)	Hello Mr. UMENCHO, Yes I am having WinCC 7.0 + SP2 software installed with updated by update1 CD given in CD package. Thanx Regards BMP
BMP Posts: 36 Rating: (0)
Suggestion To thank Quote Answer

10/19/2011 7:30 AM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Try it with installing Update 5.Update 5 for WinCC V7.0 SP2 and WinCC V7.0 SP2 ASIA Best regards, Hristo MIhalev

Suggestion To thank Quote Answer

11/14/2011 6:01 AM	Rate (0)
BMP Posts: 36 Rating: (0)	Hello Sir, Thanks for link. I downloaded the WINCC Update 5 and installed but i still facing the same problem.
BMP Posts: 36 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on