Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

To store data in memory card must be set as a transfer or program?

Created by: automatizzando at: 11/13/2011 5:36 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/13/2011 5:36 PM	Rate (0)
automatizzando Silver Member Joined: 3/11/2007 Last visit: 12/30/2025 Posts: 226 Rating: (13)	Pegaia Hi, the data log is avaliable just in Web interface. You will need a device that could work with Web pages and open .csv archives. It is not the case of a KTP. To store data in memory card must be set as a transfer or program? or just empty? thanks
	Last edited by: O_Moderator at: 11/14/2011 11:22 AM new subject after splitting from /tf/WW/en/Posts/57715#top
Suggestion To thank Quote Answer

11/14/2011 6:51 PM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 12/30/2025 Posts: 4435 Rating: (1487)	Hi, you are rigth: the data log could be stored in intern load memory or in the SD card load memory, as PLC expansion. So, the SD card should be configured as program, not as transfer.
	Last edited by: Pegaia at: 11/14/2011 6:56 PM Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/14/2011 10:06 PM	Rate (0)
automatizzando Silver Member Joined: 3/11/2007 Last visit: 12/30/2025 Posts: 226 Rating: (13)	thank you very much

Suggestion To thank Quote Answer

11/15/2011 7:22 PM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 12/30/2025 Posts: 4435 Rating: (1487)	you are wellcome
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on