Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

AM2 AQ Programming

Created by: OS_2011 at: 11/23/2011 11:47 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

11/23/2011 11:47 PM	Rate (0)
OS_2011 Posts: 2 Rating: (0)	Hello, Can anyone help me on how to asign the outputs on a AM2 AQ? i can only seem to get access to two AQ's! I am running LOGO!Soft Comfort Ver 7 and looking at using a OBA7 & AM2 AQ Thanks
OS_2011 Posts: 2 Rating: (0)	Last edited by: OS_2011 at: 11/24/2011 12:08 AM
Suggestion To thank Quote Answer

11/24/2011 7:15 AM	Rate (1)
Marcjan Diamond Member Joined: 4/22/2010 Last visit: 3/31/2025 Posts: 5697 Rating: (716)	Hello, A single Logo only supports 2 AQ, if you need more than 2 you have to be creative. Add another Logo(7) in a network or a Digital to Analog converter. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

11/24/2011 11:19 AM	Rate (0)
OS_2011 Posts: 2 Rating: (0)	Marcjan, Thanks for the response, i was rapidly coming to the conclusion that this was the case. Keith
OS_2011 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on