Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Indirect Addressing

Created by: saltinisik at: 12/2/2011 8:42 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/2/2011 8:42 AM	Rate (0)
saltinisik Posts: 1 Rating: (0)	Hi, I am newto Siemens PLCs. I have the code below in my program. As you see I transfer a pointer to RECORD parameter. CALL SFC 13 REQ :=TRUE LADDR :=W#16#3FE RET_VAL:=#Return_Value RECORD :=P#DB1.DBX2.0 BYTE 130 BUSY :=#Bust_Status But I want to have a dinamic pointer, for example; RECORD :=P#DB[MW0].DBX2.0 BYTE 130 I get an error, is it possible to have a dinamic pointer like this. What is the correct syntax? Thanks in advance, Best Regards..
saltinisik Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

12/2/2011 9:32 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 7/31/2025 Posts: 9027 Rating: (1199)	Hello, Please have a look at the Online help of STEP 7. Search for "ANY" and display "using the parameter Type Any" Here you will find an example to make an ANY pointer variable. Best regards, Wizard

Suggestion To thank Quote Answer

12/2/2011 9:52 AM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	How do you parameterize blocks, which have "ANY"-type or "Pointer" type parameters?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on