Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

When I try to access HW Config from within Simatic Manager, nothing happens

Created by: tonybalony at: 12/11/2011 10:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/11/2011 10:08 AM	Rate (0)
tonybalony Posts: 1 Rating: (0)	Hello all. I have just installed STEP 7 v5.5 SP1 on Windows 7 Ultimate, and, for some reason, there is a problem with the OLE. When I try to access HW Config from within Simatic Manager, nothing happens. I have to go directly to HW Config to do anything. Also, when I try to access the LAD/STL/FDB: Program Blocks application to do my programming, I get the following error message: COperandListHandler::Int()- CLSIDFormProgID(S7SymbolTools.S7SymbolManager) schiefgegangen Refer to the attached JPEG. When I click O.K. on the dialog box displaying this message, the application opens up, but when I select a block to program, it crashes and closes. Has anybody ever encountered this problem? Can anyone tell me what I need to do? I have installed, uninstalled and reinstalled many times. Nothing I know to do works. Please help if you can. Thanks Attachment Program Problem_1.jpg (163 Downloads)
tonybalony Posts: 1 Rating: (0)	Last edited by: O_Moderator at: 12/12/2011 11:52 AM new subject after splitting from /tf/WW/en/Posts/63701#top
Suggestion To thank Quote Answer

12/11/2011 3:30 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Hello, How do you clear message 256:26 "An OLE error has occurred"? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on