Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

i'm to try reintall Step 7 V5.5 on my PC but there is no selection for "PC internal (local)"

Created by: danhsistech at: 12/15/2011 4:02 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/15/2011 4:02 PM	Rate (0)
danhsistech Advanced Member Joined: 12/15/2011 Last visit: 3/15/2024 Posts: 11 Rating: (0)	Hi all! i'm to try reintall Step 7 V5.5 on my PC butthere is no selection for "PC internal (local)". please help me. :(
	Last edited by: O_Moderator at: 12/16/2011 11:10 AM new subject after splitting from /tf/WW/en/Posts/12326#top
Suggestion To thank Quote Answer

12/20/2011 1:43 PM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 1/29/2025 Posts: 1940 Rating: (138)	Hello, it is possible that the necessery driver is not still installed. Check the system settings and the hardware manager, whether the driver is installed. Otherwise try the software installation again. With best regards Cicero

Suggestion To thank Quote Answer

12/20/2011 3:57 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Follow How can you completely uninstall STEP 7 including all the software packages? then Step7 5.5 and update it to SP1. (http://support.automation.siemens.com/WW/view/en/52336355) Best regards, Hristo MIhalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on