Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

USS Communications Protocol

Created by: erblaha at: 1/29/2007 5:54 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/29/2007 5:54 PM	Rate (0)
erblaha Posts: 37 Rating: (1)	I am trying to find the communications specifications for USS Communications between a PLC and many SIMOVERT Drives. Thus far I have been unable to find the details I am looking for. What I need is the wire/communications specifications for USS protocol, including: Communications installation distances and limitations Baud rate limitations over the above distances Any other points of interest in installing a USS network by an end user If anyone has any insight or links to a FAQ or document that could give me some details on this it would be quite appreciated. Thanks, Eric
erblaha Posts: 37 Rating: (1)
Suggestion To thank Quote Answer

1/30/2007 9:34 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/9/2026 Posts: 9104 Rating: (1202)	Hello Eric, Here is a link to manual: http://support.automation.siemens.com/WW/view/en/24178253 Hope it will help you. Best regards, Wizard

Suggestion To thank Quote Answer

1/31/2007 4:44 PM	Rate (0)
erblaha Posts: 37 Rating: (1)	That is exactly what I was looking for. Now to figure out why my search attempts did not yield the result, but that is another problem for a different day. Thanks
erblaha Posts: 37 Rating: (1)
Suggestion To thank Quote Answer

2/1/2007 9:13 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/9/2026 Posts: 9104 Rating: (1202)	You are welcome Greetings Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on