Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Shared DB initial value

Created by: Milosh at: 12/22/2011 9:41 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

12/22/2011 9:41 PM	Rate (0)
Milosh Silver Member Joined: 8/16/2010 Last visit: 6/18/2025 Posts: 640 Rating: (12)	Hi all. I create DB3 as Shared. There is few Real variables with set Initial value. But when I download project to PLC all values is 0. I checked, no where in code I not reset that values.

Suggestion To thank Quote Answer

12/23/2011 8:43 AM	Rate (0)
Aret Posts: 2348 Rating: (265)	Try following - create STL source, ensure that you have your variables set to initial value in this source, delete DB3, regenerate it with source.
Aret Posts: 2348 Rating: (265)
Suggestion To thank Quote Answer

1/5/2012 3:48 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 4/28/2025 Posts: 229 Rating: (28)	Hello, try in Data Block. Click in menu View/Data View and after Edit/Initialize Data Block, save the block then download again. Check the values... Good lock
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users eden

1/11/2012 4:29 PM	Rate (0)
Milosh Silver Member Joined: 8/16/2010 Last visit: 6/18/2025 Posts: 640 Rating: (12)	Yes that's it. I also found that solution and it's work. Thank's.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on