Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How can I transfer values to MMC

Created by: HristoAtanasov at: 2/10/2012 1:31 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/10/2012 1:31 PM	Rate (0)
HristoAtanasov Posts: 23 Rating: (0)	Hi, I need to store values from my IW98 input (temperature in celsius) to the MMC every hour. I guess that it`s data logging and data block functions but I didn`t understood them exactly. Please help Best regards!
HristoAtanasov Posts: 23 Rating: (0)	Last edited by: HristoAtanasov at: 2/10/2012 1:32 PM
Suggestion To thank Quote Answer

2/10/2012 1:51 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	HristoAtanasov Hi, I need to store values from my IW98 input (temperature in celsius) to the MMC every hour. I guess that it`s data logging and data block functions but I didn`t understood them exactly. Please help Hello HristoAtanasov, Check here - Sample Program: S7-1200 and Data Log
	Like it? Rate it!
Suggestion To thank Quote Answer

2/12/2012 3:22 PM	Rate (0)
HristoAtanasov Posts: 23 Rating: (0)	Sorry this was not helpful..
HristoAtanasov Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

2/13/2012 10:42 AM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 1/15/2026 Posts: 4448 Rating: (1487)	Hi, Why this was not helpful? What do you need to know?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on