Default Header
(header konnte nicht geladen werden)
Navigation
Rating 
Thanks 1
2 Entries
| 2/22/2012 5:36 AM | |
Joined: 10/7/2005 Last visit: 9/14/2025 Posts: 3049 Rating:
|
Hello Khyzer keep it simple in this case (only 10 values and no fancy handling required) by "hardcoding"10 moves as followed: Value 9 --> 10 Value8 --> 9 . . Value1 --> 2 Value new --> 1 Should you need something more flexible or a larger FIFO, you'll find a FIFO block (FC84) in the TI to S7 coverting library and also would have found the following examples plusplenty of forum related posts if you'd cared todo a search on the subject at https://support.automation.siemens.com: Temporary storage of the received data in a ring buffer according to the FIFO principle and pass on to the user interface "FIFO" for buffering measured values I hope this helps |
|
Cheers |
|
This contribution was helpful to
|
|
Follow us on