Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

help:Totaliser

Created by: Andy Moods at: 9/17/2010 12:46 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/17/2010 12:46 PM	Rate (0)
Andy Moods Posts: 33 Rating: (0)	Hi Im fairly new to this software and been using s5 before. Can someone plese help with info as to how i can do a monthly totaliser. the different data type is really killing me. Also im using 4-20mA Analog inputs and the card is configured for 0 -20mA. is that a problem or do ijust ignore anything below 4
Andy Moods Posts: 33 Rating: (0)	Last edited by: Andy Moods at: 9/17/2010 1:10 PM
Suggestion To thank Quote Answer

2/25/2012 8:35 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	Andy Moods Hi Im fairly new to this software and been using s5 before. Can someone plese help with info as to how i can do a monthly totaliser. the different data type is really killing me. Also im using 4-20mA Analog inputs and the card is configured for 0 -20mA. is that a problem or do ijust ignore anything below 4 Hello Andy, You can use the 0-20mA channel to measure your 4-20mA current, only thing you need to do is as you said ignore the values less than 4 mA. For your totalizer - see her something similar to that: How is numerical integration for the S7-1200 programmed in STEP 7 (TIA Portal) V11?
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on