Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Accumulator Insturction in S7-1200

Created by: sk83 at: 2/26/2012 4:11 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

2/26/2012 4:11 PM	Rate (0)
sk83 Experienced Member Joined: 6/6/2011 Last visit: 6/1/2025 Posts: 9 Rating: (0)	Dear All Expert Member, I am just new learn S7-1200 (newbie) , if i want to use accumulator instruction nop 0 like in s7-300 or s7-400. How to use it in s7-1200... sorry for bad my english

Suggestion To thank Quote Answer

2/26/2012 5:47 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	sk83 Dear All Expert Member, I am just new learn S7-1200 (newbie) , if i want to use accumulator instruction nop 0 like in s7-300 or s7-400. How to use it in s7-1200... sorry for bad my english Hello sk83, S7-1200 does not support STL unlike S7-300/S7-400. It supports LAD, FBD, SCL
	Like it? Rate it!
Suggestion To thank Quote Answer

2/26/2012 8:17 PM	Rate (0)
sk83 Experienced Member Joined: 6/6/2011 Last visit: 6/1/2025 Posts: 9 Rating: (0)	In Ladder or fbd , what is the same insrtuction with nop 0

Suggestion To thank Quote Answer

2/27/2012 6:05 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	sk83 In Ladder or fbd , what is the same insrtuction with nop 0 Hello sk83, unfortunately there is no instruction like NOP in LAD or FBD.
	Like it? Rate it!
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

|

Share this page:

Share this page on...

Follow us on