Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

I cannot make migrations of projects even they are created at STEP7 V5.5?

Created by: zzzexxx at: 2/16/2012 10:11 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/16/2012 10:11 PM	Rate (0)
zzzexxx Posts: 27 Rating: (0)	thank You guys... now I have remove all STEP7 components and install TIA, but now I cannot make migrations of projects even they are created at STEP7 V5.5?
zzzexxx Posts: 27 Rating: (0)	Last edited by: O_Moderator at: 2/20/2012 9:25 AM new subject after splitting from /tf/WW/en/Posts/69589#top
Suggestion To thank Quote Answer

2/25/2012 5:14 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	zzzexxx thank You guys... now I have remove all STEP7 components and install TIA, but now I cannot make migrations of projects even they are created at STEP7 V5.5? Hello zzzexxx, where are you struck up with, provide some details on that. If you have the migration log then post it here
	Like it? Rate it!
Suggestion To thank Quote Answer

2/27/2012 11:43 AM	Rate (0)
Azteke0110 Posts: 376 Rating: (57)	Hello zzzexxx, Herefind you manyinformation about the topic migration for STEP 7 V5.x projects. Perhaps this information helps you to find the cause. FAQ: What are the requirements for migrating a STEP 7 V5.x project to STEP 7 Professional V11? http://support.automation.siemens.com/WW/view/en/56314851 FAQ/Webcast: What are the prerequisites for migrating STEP 7 V5.x projects to STEP 7 (TIA Portal) V11? http://support.automation.siemens.com/WW/view/en/54173102 Good luck! Best reagrds Azteke0110
Azteke0110 Posts: 376 Rating: (57)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on