Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Nodes not visisble in Step 7 GUI

Created by: Manish_Soni at: 2/21/2012 10:34 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/21/2012 10:34 AM	Rate (0)
Manish_Soni Posts: 41 Rating: (0)	Hi, I am trying to reset my device using STEP 7. After Going to plc-> edit ethernet node. But the Reset button is grayaed out and I am not able to click that at all. When i am doing browsing for all the node accesible online not, able to find any mac addrees/devices. But my switch is connected to controller and am able to configure switch using STEP 7 GUI. Please let me know what is wrong here. Appreciate help here. Thanks, Manish.
Manish_Soni Posts: 41 Rating: (0)
Suggestion To thank Quote Answer

2/28/2012 10:19 AM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 1/29/2025 Posts: 1940 Rating: (138)	Hello, this function is supported with STEP 7 V5.5 or higher. Please see also the FAQ in the internet, which could be meanful for you: http://support.automation.siemens.com/WW/view/de/50575132 With best regards Cicero

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on