Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

TIA Portal v11 and S7 Graph

Created by: maciekelga at: 2/18/2012 5:52 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

2/18/2012 5:52 PM	Rate (0)
maciekelga Posts: 11 Rating: (0)	Hi, i have a program with sequential control made in TIA portal v11 professional and now i need to make a graph for this, it is possible to make this in S7-graph? When i try to open project in S7-graph i can`t do this.
maciekelga Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

2/24/2012 10:38 AM	Rate (1)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 1/14/2026 Posts: 4447 Rating: (1487)	Hi, if you have V11 Professional, and works with S7-300/400, when you create a new block you can chose "GRAPH". "GRAPH" is not avaliable for S7-1200.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users poseidon_8390

2/29/2012 7:48 PM	Rate (0)
maciekelga Posts: 11 Rating: (0)	Thanks for answer, so I have to make this sequential control for s7-300. I try to make this for 1200 but I can`t find it ;)
maciekelga Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on