Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

set date&time user input

Created by: ionut.b at: 11/16/2011 5:01 PM (9 Replies)

Rating (0)

Thanks 0

10 Entries

11/16/2011 5:01 PM	Rate (0)
ionut.b Posts: 289 Rating: (3)	Some times when I input new values for s7-1200 clock via HMI (TP700), in the keyboard window I can see a callendar icon. This calendar makes the job of chosing desired values for date and clock more easy. But this icon only aprears randomly (in place markerd with red rectangle). How to set display it allways? Attachment user input date_time.jpg (864 Downloads)
ionut.b Posts: 289 Rating: (3)
Suggestion To thank Quote Answer

11/17/2011 3:13 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, I can not understand what you mean? What do you want to do? Where is the callendar icon in your screenshot? Tweety
Tweety Posts: 3037 Rating: (192)	Last edited by: Tweety at: 11/17/2011 3:13 PM
Suggestion To thank Quote Answer

11/17/2011 3:27 PM	Rate (0)
ionut.b Posts: 289 Rating: (3)	It's not in the picture. As I mentioned previously it only appears randomly. How to display it allways?
ionut.b Posts: 289 Rating: (3)
Suggestion To thank Quote Answer

11/18/2011 10:21 AM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, I have not seen a icon there. Can you post a picture of this icon? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

11/18/2011 10:47 AM	Rate (0)
ionut.b Posts: 289 Rating: (3)	When I will catch it I will do a print screen. Thank you.
ionut.b Posts: 289 Rating: (3)
Suggestion To thank Quote Answer

3/8/2012 10:33 AM	Rate (0)
ionut.b Posts: 289 Rating: (3)	I have managed to make a print screen for user administration login. A small calendar icon similar to this one, is shown also for date&time input field but I can't "catch it". Seems to be displayed on double click but not allways. Thank you. Attachment print_screen.jpg (840 Downloads)
ionut.b Posts: 289 Rating: (3)
Suggestion To thank Quote Answer

3/8/2012 2:12 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Which version of WinCC V11 do you use exactly? Do you use a date and time field or an I/O field? Can you reproduce this behaviour with the simulator on your computer? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

3/9/2012 10:01 AM	Rate (0)
ionut.b Posts: 289 Rating: (3)	Hello, I use WINCC V11 SP1. I tryed both with I/O field and date/time field. Also in the simulator can't make it appear. I have the actual TP700 display and the behaviour is the same. Thank you.
ionut.b Posts: 289 Rating: (3)
Suggestion To thank Quote Answer

3/9/2012 10:58 AM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 1/13/2026 Posts: 4446 Rating: (1487)	Hi, if the keyboard has a different behavior for the same situation (i.e. same io field, same compilation, etc.), then I suggest you open a Support Request (in this site, open, right) and relate it as a probable "bug". However, before it I think that should better you try first with WinCC V11 SP2.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

3/9/2012 1:56 PM	Rate (0)
ionut.b Posts: 289 Rating: (3)	I can't say the keyboard is not working properly. Also I can't find any info in the manual about this small icon. I will ask Support Request. Thank you.
ionut.b Posts: 289 Rating: (3)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on