Navigation

Logo read data from encoder

Created by: Milosh at: 3/26/2012 5:02 PM (1 Replies)

3/26/2012 5:02 PM	Rate (0)
Milosh Gold Member Joined: 8/16/2010 Last visit: 12/18/2025 Posts: 640 Rating: (12)	Hi all. How to read data from encoder...I never try to read encoder data, and need help about that. Thanks.

Suggestion To thank Quote Answer

3/26/2012 5:23 PM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, you can conect the signals to and digital input of LOGO! and use an Up/Downcounter to count the pulses. Upto 5kHz is possible with LOGO! (DC versions). Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

Share this page:

Share this page on...