Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

CP3434-1 Lean and WinCC Flexible

Created by: ClaPet at: 2/26/2007 12:14 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

2/26/2007 12:14 PM	Rate (0)
ClaPet Posts: 26 Rating: (0)	I have a customer who is trying to configure a WinCC Flexible HMI which is connected to a CP343-1 Lean. He cannot create a configuration. What could be the problem? Peter Claus claus@siemens.com
ClaPet Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

2/26/2007 4:07 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hello, Have you seen this link: http://support.automation.siemens.com/WW/view/en/24109937 Best regards, Wizard

Suggestion To thank Quote Answer

3/1/2007 8:00 AM	Rate (0)
ClaPet Posts: 26 Rating: (0)	Hello Wizard, I know how to connect a connection to WinCC Flexible via a normal ethernet card. My question is how do I do this with CP343-1 Lean. Regards Peter Claus
ClaPet Posts: 26 Rating: (0)	Last edited by: ClaPet at: 01.03.2007 08:03
Suggestion To thank Quote Answer

3/1/2007 9:28 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hello ClaPet, If you want a WinCC flexible project communicate with a S7-300. You can use an CP343-1 or CP343-1 Lean. Both are capable to use PG/OP communication. In that case there is no difference between both CP's See following link: http://support.automation.siemens.com/WW/view/en/16767769 When you know how to connect a HMI project with CP343-1, you can also use the CP343-1 lean. Best regards, Wizard

Suggestion To thank Quote Answer

3/1/2007 10:14 AM	Rate (0)
ClaPet Posts: 26 Rating: (0)	Dear Wizard, The CP343-1 Lean isactually is not the same as the other CP cards. The CP343-1 Lean is the server, so I believe it has to use PUT and GET function blocks for the HMI. In normal cases the HMI fetches the data from the PLC. Peter Claus
ClaPet Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

3/1/2007 10:41 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Hello Clapet, Yes, you're right. CP343-1 lean isn't the same as CP343-1. But that'sin case of S7-connections. The HMI is an OP-connection The customer cann't create a configuration. Can you please explain, whatthe difficulty is. I'm very interesting. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on