Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Can't Find languge SCL and Graph

Created by: lee_dong25 at: 3/30/2012 6:36 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/30/2012 6:36 AM	Rate (0)
lee_dong25 Posts: 6 Rating: (0)	I have setuped Tia Port v11 Professinal but I can't find DB to write language SCL and Graph. I have only seen STL and LAD. Please helps me to this resolution. Thanks.
lee_dong25 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

3/30/2012 12:17 PM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 1/16/2026 Posts: 4449 Rating: (1487)	Hi, I don't understand your question. DB are not code program blocks, just a "placeto store variables". Can explain your doubt again?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/4/2012 10:33 AM	Rate (0)
Bryll Posts: 168 Rating: (5)	Don't know if I understand you correctly, but if you have the latest Service Pack installed will you find the SCL language. Works in FC or FB. If you don't have SP2 installed, do it now and the portal will work better and you'll find SCL too.
Bryll Posts: 168 Rating: (5)
Suggestion To thank Quote Answer

4/4/2012 11:59 AM	Rate (0)
Denilson Pegaia Diamond Expert Joined: 9/23/2005 Last visit: 1/16/2026 Posts: 4449 Rating: (1487)	Hi, what do you can't do exactally?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on