Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

S7-1200-HMI Communication

Created by: Madhuri at: 4/12/2012 9:26 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/12/2012 9:26 AM	Rate (0)
Madhuri Posts: 7 Rating: (0)	I want to operate a PLC (S7-1200) thr' HMI runtime simulation.I tried it , but it doesnt work.It gives an error saying"Tag can not be written to the PLC". Can anyone tell me whether it is possible to do so, and if Yes, Please let me know the procedure
Madhuri Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

4/14/2012 10:14 AM	Rate (0)
SonNH Posts: 50 Rating: (1)	Hi Madhuri I've never simulate HMI software on PC with S7-1200, just S7-300, S7-400 but I think it's similar. First, choose right HMI Connection Driver to connect to PLC, may be PLC-SIM (if you use PLC Simulator), or Ethernet card (If you use Profinet or Ethernet), or CP5611 (if use Profibus or MPI).. Second, compile your HMI runtime (rebuild all) and use WinCC RT Start to start HMI runtime. Now you can connect HMI runtime to your real PLC or sim PLC. Good luck
SonNH Posts: 50 Rating: (1)
Suggestion To thank Quote Answer

4/14/2012 4:40 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Hello, You can simulate HMI configuration not PLC. Why is communication between the Runtime simulation and the S7-1200 not possible if the PG/PC interface is not set correctly? best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on