Navigation

how to read or write by Modbus TCP/IP with WinCC V11?

Created by: Sardar99 at: 5/2/2012 9:56 AM (1 Replies)

5/2/2012 9:56 AM	Rate (0)
Sardar99 Posts: 13 Rating: (0)	Dear All Could any one give me a sample how to use the VB or C script, how to read or write by Modbus TCP/IP, becaus I have WinCC V11 and I can chose the Modicon Mobus TCP/IP, in the communication drier in the Connections with HMI, the question where and how to send and recive the Modbus Function codes, I will be very appreciated your help thanks and best regads
Sardar99 Posts: 13 Rating: (0)	Last edited by: O_Moderator at: 5/3/2012 11:53 AM new subject after splitting from /tf/WW/en/Posts/66866#top
Suggestion To thank

5/3/2012 11:54 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closee, because question is already published in the following thread read and Write address from a Modbus TCP/IP device with WinCC V11. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank