Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

nControll with 611U

Created by: IBN-Service at: 4/28/2012 8:26 PM (15 Replies)

Rating (8)

Thanks 10

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

5/3/2012 9:37 AM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Just your attaced project to be cleared. Of course is possible 'to cut' all the other staff there exept the main idea of actual thread. Best regards, Hristo Mihalev Attachment Untitled.jpg (376 Downloads)

Suggestion To thank Quote Answer

5/4/2012 8:27 AM	Rate (1)
pfuser Gold Member Joined: 9/18/2006 Last visit: 12/8/2025 Posts: 596 Rating: (64)	UMENCHO Just your attaced project to be cleared. Of course is possible 'to cut' all the other staff there exept the main idea of actual thread. Best regards, Hristo Mihalev Hi. I have many translated into English. If you need a translation - I am happy to continue. I repeat - this is for the S120 (FB283). In details: FC61 - organizes the exchange of data-driven (the address and size of the telegrams in HWConfig) FC47, FC48 - Fill the telegram with drive. View the structure of the telegram - in Starter. Best regards. Attachment Example_nContr.zip (359 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users IBN-Service

5/5/2012 5:53 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	Dear pfuser, have a lot of thanks for your work and translation! pfuser ...View the structure of the telegram - in Starter. Best regards. Unfortunately, I have to use Starter V4.1, that is too old for your parameter file. Can you please do a screencopy of the telegram page? (Anyway, I have to use the SimoCOM software for my 611...) Thanks in advance and have a nice Weekend!
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users pfuser

5/6/2012 7:08 PM	Rate (1)
pfuser Gold Member Joined: 9/18/2006 Last visit: 12/8/2025 Posts: 596 Rating: (64)	IBN-Service Unfortunately, I have to use Starter V4.1, that is too old for your parameter file. Can you please do a screencopy of the telegram page? (Anyway, I have to use the SimoCOM software for my 611...) Thanks in advance and have a nice Weekend! Hi. I am always happy to help. I repeat. I worked before with Simodrive 611. I have the example of the use of Simodrive 611 posContr. If you want, I can put this example. Best regards. Attachment PicFromStarter.ZIP (350 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users IBN-Service

5/7/2012 8:12 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	pfuser Hi. I am always happy to help. I repeat. I worked before with Simodrive 611. I have the example of the use of Simodrive 611 posContr. If you want, I can put this example. Best regards. Thanks again! If you like, send me the PosCtrl example as well! Please include the .PAR Files if possible.
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

5/7/2012 11:45 AM	Rate (1)
pfuser Gold Member Joined: 9/18/2006 Last visit: 12/8/2025 Posts: 596 Rating: (64)	IBN-Service pfuser Hi. I am always happy to help. I repeat. I worked before with Simodrive 611. I have the example of the use of Simodrive 611 posContr. If you want, I can put this example. Best regards. Thanks again! If you like, send me the PosCtrl example as well! Please include the .PAR Files if possible. All right. Finish the job (Thread) :). Best regards. Attachment Example_posControls.ZIP (370 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users IBN-Service

|

Share this page:

Share this page on...

Follow us on