Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Unable de view analog input value.

Created by: Gadz at: 7/2/2011 11:49 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/2/2011 11:49 AM	Rate (0)
Gadz Regular Member Joined: 5/11/2011 Last visit: 8/7/2025 Posts: 10 Rating: (1)	Hi, I am using an ET200s (IM151-8 CPU) with several analog inputs (6es7 134 4GD00 0AB0). Unfortunatly, I can't manage to view the value from my analog input (see attached file). The sensor is correctly wired, and a multimeter shows me a that the current is good (arround 10mA for most of my sensors) I am using TIA 11 Thank you in advance Gadz Attachment TIA11.JPG (519 Downloads)

Suggestion To thank Quote Answer

7/4/2011 4:23 PM	Rate (0)
Robster Platinum Expert Joined: 5/28/2008 Last visit: 11/11/2025 Posts: 1344 Rating: (141)	Maybe try to download hardware and software again. Your FC1 e.g. is not downloaded to PLC.

Suggestion To thank Quote Answer

6/1/2012 7:24 PM	Rate (0)
allen1 Posts: 54 Rating: (1)	same problem... help me please
allen1 Posts: 54 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on