Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Pop Up Msg before shutdown a system

Created by: Bob76 at: 7/5/2012 5:06 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

7/5/2012 5:06 PM	Rate (0)
Bob76 Posts: 11 Rating: (1)	Hello, I got TIA V11 SP1 with WinCC Basic, i have a merker M0.0 connected to a HMI page button that controls a Q0.0 output to power on-off a system. What i need is to display following message if the user press the button when the system is ON: "Warning the system will be turned off!" Then user has to confirm its intent maybe with OK and Cancel buttons becomed visible in this circumstance that let or not the system power down respectively. Can anybody suggest me the way to reach this? Thanks in advance. MR
Bob76 Posts: 11 Rating: (1)	Last edited by: Bob76 at: 7/5/2012 5:08 PM
Suggestion To thank Quote Answer

7/6/2012 10:46 AM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, you cancreateadiscrete alarm"Warning the system will be turned off!". You can create the function "ActivateScreen"on the event of thisalarm " incoming".Youcan create two buttons in thisnew screen. 1.button with "OK" on the function " StopRuntime". 2. button with "Cancel" on the function "ActiveScreen" to the "main menu". You can create a messageview in this new screen, then you can dsiplay this discrete alarm"Warning the system will be turned off!". Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

7/6/2012 3:56 PM	Rate (0)
Bob76 Posts: 11 Rating: (1)	Thank you Tweety, but i don't really understand what you mean. I am still a beginner in using TIA portal, can you tell me about your solution with some more details? if i make a discrete alarm, how i can create the event ? there is also a trigger to set for the alarm, but it accepts only int type tags. How i can create a ladder logic diagram to create a trigger event when the user choose to shut down the system? I can't actually see in KOP language which blocks i have to use... i am very confused at the moment
Bob76 Posts: 11 Rating: (1)
Suggestion To thank Quote Answer

7/10/2012 5:25 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Bob76 Thank you Tweety, but i don't really understand what you mean. I am still a beginner in using TIA portal, can you tell me about your solution with some more details? if i make a discrete alarm, how i can create the event ? there is also a trigger to set for the alarm, but it accepts only int type tags. Hello, You can see the event "incoming" ofa discrete alarmin the following screenshot. Tweety Attachment screenshot.jpg (627 Downloads)
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

7/11/2012 5:28 PM	Rate (0)
Tomy Master Platinum Member Joined: 5/4/2009 Last visit: 1/1/2026 Posts: 916 Rating: (40)	OK, Can we create a "POP UP" screen which is smaller than the main calling screen. Regards. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

7/12/2012 5:05 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, You can this with WinCC Professional Runtime not with WinCC Advanced. You can jump with the function "ActivateScreen" in another screenwithWinCC Advanced. The Screen has the samesize as the previous page. Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Alarms Messages

Follow us on