Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Dowloaded program not going in online

Created by: Kunjandi at: 7/13/2012 10:51 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/13/2012 10:51 PM	Rate (0)
Kunjandi Posts: 113 Rating: (0)	Hello Everybody, In Siemens PLC I am very beginner, I have made program for a winder machine, but I could not go to online, there are many errors diagnostic message like parameter assign error, I could not recognize the errors ,somebody please check my program and give me solution
Kunjandi Posts: 113 Rating: (0)
Suggestion To thank Quote Answer

7/14/2012 10:07 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 8/31/2025 Posts: 6874 Rating: (1368)	pada Hello Everybody, In Siemens PLC I am very beginner, I have made program for a winder machine, but I could not go to online, there are many errors diagnostic message like parameter assign error, I could not recognize the errors ,somebody please check my program and give me solution Hello , If you are working on S7300 or S7400 with STEP7,I suggest reading this manual first. Working with STEP 7 V5.4 Getting Started and check this clustered posts: HD_STEP7 Starting Point I Check the following manual: 1-Working with STEP 7 V5.4 Getting Started 2-SIMATIC Programming with STEP 7 V5.5 and these demos: 3-The SIMATIC Manager 4-The Basic Languages LAD, FBD, STL 5-The SIMATIC S7 Architecture Best regards Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

7/18/2012 2:21 PM	Rate (0)
desmul24 Posts: 378 Rating: (73)	pada Hello Everybody, .... somebody please check my program and give me solution Where is your program? I suggest to read hdhosseini post on this thread and come up with more specific questions.
desmul24 Posts: 378 Rating: (73)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on