Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Sinumeric to Simatic Net

Created by: GFab at: 3/28/2007 10:24 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

3/28/2007 10:24 PM	Rate (0)
GFab Posts: 5 Rating: (0)	I'm using Sinumeric with an opc server and vb6 as programation language. I'd like to use an opc server like this one and work with a S7-300 and vb6. I know there is simatic net but it's not possible to use vb6 with it... Do you know if there is an opc server working with S7-300 plcs and vb6 as language for the interface? If yes, can you give me at least the name of this software? Thanks in advance.
GFab Posts: 5 Rating: (0)	Last edited by: GFab at: 28.03.2007 22:26
Suggestion To thank Quote Answer

3/30/2007 10:35 PM	Rate (0)
Calm_down Posts: 324 Rating: (30)	Hello, I doubt what you wrote. I am sure that VB 6 will work with SIMATIC NET Edition 2005 and 2006, 100%. Stay calm.
Calm_down Posts: 324 Rating: (30)
Suggestion To thank Quote Answer

3/31/2007 7:03 PM	Rate (0)
GFab Posts: 5 Rating: (0)	Thanks for your answer. Ok, I'll try that. Do you know if it's the same dll I have to use to communicate with vb6 than for vb.net ?
GFab Posts: 5 Rating: (0)	Last edited by: GFab at: 31.03.2007 19:04
Suggestion To thank Quote Answer

4/1/2007 8:14 PM	Rate (0)
Calm_down Posts: 324 Rating: (30)	Hello, I do not know how it looks like in Edition 2006 but with Edition 2005 I know that VB.NET is not possible... at least it is not released as far as I know. I hope I could help. Stay calm.
Calm_down Posts: 324 Rating: (30)
Suggestion To thank Quote Answer

4/15/2007 7:23 PM	Rate (0)
GFab Posts: 5 Rating: (0)	Hello again, I check on the second cd of simatic(doc cd) if I can use my actual version (simatic net 2005) on an old version of windows (windows 98, not NT) and it looks not possible. Do you know what's the last version of simatic which is able to run on this OS ? Thanks in advance.
GFab Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/15/2007 7:50 PM	Rate (0)
Calm_down Posts: 324 Rating: (30)	Hello GFab, I think the last version that is released for NT4 is 5/2001... But I am not 100% sure. But it surely not from the year 2002. Please check for yourself. Stay calm.
Calm_down Posts: 324 Rating: (30)
Suggestion To thank Quote Answer

4/16/2007 9:40 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/9/2026 Posts: 9104 Rating: (1202)	Hello GFab, Please have a look at this link: http://support.automation.siemens.com/WW/view/en/9859007 Hope it will help you, Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on