Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Int-Word conversion help

Created by: grayman at: 7/30/2012 5:47 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

7/30/2012 5:47 AM	Rate (0)
grayman Posts: 15 Rating: (0)	Hi there Does anyone know how to convert an Integer value to a Word equivalent using ladder or STL? I am using S7 ver5.3. Ineed towritean Integernumber to acounter pv inputbut the counter only acceptsWords. I have looked in the convert and library folders for an appropriate block but no luck. Any help much appreciated.
grayman Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

7/30/2012 7:38 AM	Rate (0)
BeVee Gold Member Joined: 7/18/2011 Last visit: 4/11/2025 Posts: 521 Rating: (91)	Hi grayman, You could use a MOVE instruction to a temp variable of type WORD. Kind regards, BV

Suggestion To thank Quote Answer

7/30/2012 7:39 AM	Rate (0)
manmeet Gold Member Joined: 1/3/2006 Last visit: 2/19/2024 Posts: 726 Rating: (71)	Use "Move" in LAD and in STL use "Load" and "Transfer"

Suggestion To thank Quote Answer

8/1/2012 4:37 AM	Rate (0)
grayman Posts: 15 Rating: (0)	Yep that did it. I tried the move blockbefore and thought it wasnt working but just noticed I was looking at the wrong register, it was working all along.....Geez I hate that. Thanks for your help much appreciated
grayman Posts: 15 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users BeVee

|

Share this page:

Share this page on...

Follow us on