Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Upload 10.5 program with V11

Created by: syd_b at: 8/2/2012 6:30 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/2/2012 6:30 PM	Rate (0)
syd_b Bronze Member Joined: 2/3/2011 Last visit: 12/12/2025 Posts: 349 Rating: (10)	Hi, if I have a S7-1200 running with a program made in v10.5 and I want to make an upload of the program with v11. Is it possible to do this? Thanks.

Suggestion To thank Quote Answer

8/3/2012 8:49 AM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Hello, I guess it will not make it successfully. But if you have a chance try it and post a feedback here. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

8/3/2012 3:43 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 1/14/2026 Posts: 16369 Rating: (2522)	syd_b Hi, if I have a S7-1200 running with a program made in v10.5 and I want to make an upload of the program with v11. Is it possible to do this? Thanks. If you can get online with the project, you can make at least a partial backup of the system. You cannot make a 100% identical project, but if you have no other option, you should be able to save your system logic and most of the configuration for the system. If you are using the latest service pack and update (v11 SP2 update 4), you should have the highest opportunity for the most success.
	science guy
Suggestion To thank Quote Answer

8/4/2012 9:07 AM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	And you can checkhttps://www.automation.siemens.com/tf/WW/en/Posts/71285#top Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on