Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

parts for 1PA motor

Created by: enri_09 at: 8/23/2012 11:13 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

8/23/2012 11:13 PM	Rate (0)
enri_09 Advanced Member Joined: 3/25/2008 Last visit: 9/22/2025 Posts: 57 Rating: (0)	Hello, I need the Bearing partused in this motor 1PA6-224 4HF20-0EA1 How can I have this. Because I not found Catalog, and know that this motor wos remplacet with 1PH7; bat i Vustomers has it running. Thanks you, enku

Suggestion To thank Quote Answer

8/24/2012 4:55 PM	Rate (1)
Deleted User Posts: 767 Rating: (69)	Hello enku, The bearing versions are documented in the configuration manual for 1PH7 motors. Below is technical description for your mentioned part number which has cylindrical roller bearings for belt output. 1PA6224-4HF20-0EA1 COMPACT ASYNCHRONOUS MOTOR FOR CONVERTER OPERATION FORCED COOLING DEGREE OF PROTECTION IP55 4-POLE WITH 400V MOTOR VLTG WITH HTL SENSOR ROD 431 110KW 1750RPM , 605 NM TERMINAL BOX ON TOP CABLE ENTRY FROM NON-DRIVE END TYPE OF CONSTRUCTION IM B 3 STANDARD DESIGN CYLINDRICAL BEARINGS VIBRATION GRADE R SHAFT AND FLANGE ACCURACY N KEY AND HALFKEY BALANCING AIR FLOW DIRECTION FROM DE TO NDE ONLY PRIMED SHAFT OUTLET IP 54 Bearing version per attachment from 1PH7 Configuration Manual since 1PA6 motors were renamed 1PH7 motors in approximately 1999 shows as follows: Bearing arrangement Motor End Drive End NU22 16E NonDrive End 6216 C3 Deputy Attachment C:\Documents and Settings\summrl\My Documents\FY12\Reference\Forum\1PH7 Bearings\1PH7 Bearings Version Configuration Manual.pdf (621 Downloads)
Deleted User Posts: 767 Rating: (69)
Suggestion To thank Quote Answer

8/25/2012 1:53 PM	Rate (0)
enri_09 Advanced Member Joined: 3/25/2008 Last visit: 9/22/2025 Posts: 57 Rating: (0)	Hello Deputy, I apreciate and thanks you for this informations. Regards, enku

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on