Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

HW configuration ET200L_SC (Profibus master - IM308C)

Created by: repsol at: 4/23/2007 2:32 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/23/2007 2:32 PM	Rate (0)
repsol Posts: 3 Rating: (0)	I have problem with HW at ET200L _ SC . Profibus Master is IM308C. I would like add new modul 6ES7123-1GB00-0AB0 to empty slot and after saving (ComProfibus SW) new HW configuration on Flash Card,insert this card to IM308C and restart PLC system is IM308C in STOP mode.
repsol Posts: 3 Rating: (0)	Last edited by: repsol at: 23.04.2007 14:33
Suggestion To thank Quote Answer

4/25/2007 9:01 AM	Rate (0)
Simaticus Posts: 262 Rating: (24)	Hi Repsol, what does the im308 tell in diags? You should check by Com Profibus... Greetings
Simaticus Posts: 262 Rating: (24)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on