Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

S7-1200 CPU- HMI pressure transmitter cant seen on the screen.

Created by: Luftwaffe at: 9/10/2012 5:56 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/10/2012 5:56 PM	Rate (0)
Luftwaffe Posts: 18 Rating: (0)	Hi , I am using s7 1200 cpu - ktp 600 and Pilz pnoz m0p ethernet .. I am communicating s7-1200 and ktp 600 over the pilz m0p .. I have a pressure transmitter on my system .. The pressure value is changing for a second and turn it's normal situation.It is coming to the s7-1200 cpu..cpu can see that .. but we can't see the value change on screen..I want to see that value change .. How can I solve my problem ? Thanks.
Luftwaffe Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

9/10/2012 6:03 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 1/7/2026 Posts: 16354 Rating: (2522)	Luftwaffe Hi , I am using s7 1200 cpu - ktp 600 and Pilz pnoz m0p ethernet .. I am communicating s7-1200 and ktp 600 over the pilz m0p .. I have a pressure transmitter on my system .. The pressure value is changing for a second and turn it's normal situation.It is coming to the s7-1200 cpu..cpu can see that .. but we can't see the value change on screen..I want to see that value change .. How can I solve my problem ? Thanks. If the PLC is sensing the pressure value properly and the HMI is not displaying properly or continuously at an acceptable update rate, how do you have the tag in the HMI configured for updating? Once, on screen load, or every 0.1s or something else?
	science guy
Suggestion To thank Quote Answer

9/10/2012 7:17 PM	Rate (0)
Luftwaffe Posts: 18 Rating: (0)	Thank you for help. it was easy . I change the cycle time. I have a programmer who think he know siemens .. But I see now he knows nothing.. Thanks for help.
Luftwaffe Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on