Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Use Analog signal on 224xp CPU

Created by: MvdW at: 4/27/2007 10:29 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/27/2007 10:29 AM	Rate (0)
MvdW Posts: 4 Rating: (0)	Hello, I'm new with the S7-200 plc I have a 224XP plc and want to use a analog input signal (0-10V) Is there any place / file where there is an explanation how to use / program the PLC. I want to use de signal to start 4 pumps example : 2 volts = 1 pump 4 volts = 2 pumps 6 volts = 3 pumps 8 volts = 4 pumps I hopethat u can help me. M vd W
MvdW Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

4/27/2007 2:25 PM	Rate (0)
Dembol Posts: 10 Rating: (0)	Hi You should start with this example : http://www.automatyka.siemens.pl/docs/docs_as/t38-e.zip regards
Dembol Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on