Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Support package error

Created by: Domi60 at: 5/18/2012 11:59 AM (25 Replies)

Rating (1)

Thanks 4

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

10/11/2012 11:24 AM	Rate (0)
chchow Posts: 4 Rating: (0)	Homeroid_BL, I just found that i haven't update my TIA Portal yet(Compare with the screenshot you provided) Kindly guide me how to update it. Thanks Attachment siemen2.JPG (638 Downloads)
chchow Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

10/11/2012 2:40 PM	Rate (0)
Homeroid_BL Posts: 211 Rating: (6)	Here it is: http://support.automation.siemens.com/WW/view/en/58112582 (1.3GB)
Homeroid_BL Posts: 211 Rating: (6)	Last edited by: Homeroid_BL at: 10/11/2012 2:41 PM
Suggestion To thank Quote Answer

10/11/2012 2:53 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	chchow Homeroid_BL, I just found that i haven't update my TIA Portal yet(Compare with the screenshot you provided) Kindly guide me how to update it. Thanks Hello chchow, You can download from here - Updates for STEP 7 V11 SP2 and WinCC V11 SP2
	Like it? Rate it!
Suggestion To thank Quote Answer

10/15/2012 10:04 AM	Rate (0)
chchow Posts: 4 Rating: (0)	i have finished upgrade my tia portal. but i still get the same error when i tried to install HSP_V11SP2_0026_001_S71200_CPU21x_MAP3_3_0. Kindly advise and guide me the next step to solve this issue. Thanks Attachment siemen_error.JPG (669 Downloads)
chchow Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

10/15/2012 12:37 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	chchow i have finished upgrade my tia portal. but i still get the same error when i tried to install HSP_V11SP2_0026_001_S71200_CPU21x_MAP3_3_0. Kindly advise and guide me the next step to solve this issue. Thanks Hello chchow, Can you pls let us know the procedure which you are following to install the HSPs which were downloaded from the previous post's URL.
	Like it? Rate it!
Suggestion To thank Quote Answer

10/16/2012 5:18 AM	Rate (0)
chchow Posts: 4 Rating: (0)	i am successful to install the hardware support package.thank you everyone. i always faced the same problem when i tried to online. error message_ connection could not be establishend. The connection partner is not responding confuse how to set the default IP to online,is it some issue related to the IP address wehn connect Kindly advise
chchow Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on