Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

wincc simulator can't connect to controller

Created by: johnny8787 at: 10/30/2012 12:47 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/30/2012 12:47 AM	Rate (0)
johnny8787 Posts: 16 Rating: (1)	Hi, I'm trying to simulate an example project. But appears the error "impossible apply value to the controller" (when i try to set a value using the widgets). The plc program is loaded in the plcsim and the plc is in run-p mode. Any idea? Thanks. Attachment Untitled.jpg (745 Downloads)
johnny8787 Posts: 16 Rating: (1)	Last edited by: johnny8787 at: 10/30/2012 12:48 AM
Suggestion To thank Quote Answer

10/30/2012 1:40 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello johnny8787, Do you have a connection to your plc? You can see it as a systemmessage in a messageview. The systemmessage says, the connection to your plc is established. Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

11/1/2012 3:11 PM	Rate (0)
johnny8787 Posts: 16 Rating: (1)	Hi, I fixed it. The problem was in PLCsim it was in mpi not in tcp/ip :S. please help me with this: /tf/WW/en/Posts/82437#411450 Thanks.
johnny8787 Posts: 16 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on