Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

WinCC V6.0 Communication with Rockwell PLC3/10 over DH+

Created by: MKD at: 5/9/2007 4:54 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

5/9/2007 4:54 PM	Rate (0)
MKD Posts: 10 Rating: (0)	I am doing project where I need to take data from Rockwell PLC3/10 in our WinCC 6.0. They are having dual DH+ bus. Do you have any experianceof communicating with PLC3/10over DH+ using OPC.
MKD Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

5/9/2007 9:53 PM	Rate (1)
Dec Gold Expert Joined: 5/19/2006 Last visit: 1/11/2026 Posts: 550 Rating: (107)	Use RSLinx (Pro/Gateway) Dec

Suggestion To thank Quote Answer

5/10/2007 2:23 PM	Rate (0)
MKD Posts: 10 Rating: (0)	Thank you for your help. Can U suggest me the communication module required at PC side (to connect the DH+) where my WinCC V6.0 is installed. Thanx MKD
MKD Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

5/11/2007 7:48 PM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 1/11/2026 Posts: 550 Rating: (107)	You can use AB 1784-KTX for DH+ or DH-485. Also you can use SST DH cards. Check with your AB distributor. Dec
	Last edited by: Dec at: 11.05.2007 19:48
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on