Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

PID integal

Created by: Mako at: 12/3/2012 12:12 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/3/2012 12:12 PM	Rate (0)
Mako Posts: 43 Rating: (1)	Hello This is my first project with S7-1200. I haveused the integated PIDblock. 1.) How can Ihold "integrating" (like S7-300/400 system block INT_HOLD) 2.) If the PID block in disabled (EN=0)and(Reset=1)--> reset is done or not? Thanks
Mako Posts: 43 Rating: (1)
Suggestion To thank Quote Answer

12/3/2012 12:54 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 1/5/2026 Posts: 6892 Rating: (1368)	Mako Hello This is my first project with S7-1200. I haveused the integated PIDblock. 1.) How can Ihold "integrating" (like S7-300/400 system block INT_HOLD) 2.) If the PID block in disabled (EN=0)and(Reset=1)--> reset is done or not? Thanks Hello , Based on parameters for PID Compact as mentioned here,It is not possible to hold integration ,See schematic of PID_Compact controller.See here. For resetting the whole algorithm,Keep "EN" input active and then activate "Reset" input. Best regards Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on