Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Migration from S7 V5.5 to Portal V11

Created by: Denker at: 11/30/2012 4:49 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

11/30/2012 4:49 AM	Rate (0)
Denker Posts: 90 Rating: (0)	I have an application configurated in S7 Manager with one CPU 315-2 PN/DP (6ES7 315-2EG10-0AB0) and one ET200S IM151-1 (6ES7 151-1CA00-0AB0) in Profibus. When I was trying the migration to Portal V11 an error has appeared. What can be the problem ? Thanks ! Attachment Migration_error.jpg (316 Downloads)
Denker Posts: 90 Rating: (0)	Last edited by: Denker at: 11/30/2012 4:56 AM
Suggestion To thank Quote Answer

12/1/2012 8:40 PM	Rate (0)
crazyCow Gold Member Joined: 12/4/2009 Last visit: 11/6/2025 Posts: 453 Rating: (137)	Denker, as stated in the error log, modules in Your S7 project are not supported in TIA. Not all hardware can be used with TIA portal. You can first try to find hardware support package (HSP) for theese modulesif it exists. If not, try migrating original project with exclued hardware configuration. I think that is an option during migration. If even that fails, exchange original project HW configuration with modules supported in TIA. Hope this helps. Regars.
	If this post actually helped, you may consider using the Rate button above.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

12/11/2012 3:31 PM	Rate (0)
Jr_Jrsolutions_BR Posts: 38 Rating: (0)	Hello These erros its because you don´t have the hardware in the TIA portal version , you can make the download and after install the Link :http://support.automation.siemens.com/WW/view/en/54164095 Nilton Junior
Jr_Jrsolutions_BR Posts: 38 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on