Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

insert range of variables option in V11

Created by: Rudrani at: 1/13/2013 10:25 AM (3 Replies)

Rating (0)

Thanks 2

4 Entries

1/13/2013 10:25 AM	Rate (0)
Rudrani Posts: 163 Rating: (4)	Hi, Can anybody tell me that, where do i find " Insert range of varibles "option in TIA PORTAL V11? regards, rudrani
Rudrani Posts: 163 Rating: (4)
Suggestion To thank Quote Answer

1/13/2013 7:57 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	rudrani Hi, Can anybody tell me that, where do i find " Insert range of varibles "option in TIA PORTAL V11? regards, rudrani Hello rudrani, In TIA Portal there is no equivalent to the "Insert range of variable" as it is in VAT table of STEP 7 v5.5 (classic software). Instead in TIA Portal it is even more easy - just recollect the filling series in MS Excel; in TIA Portal it is similar to that. Type the first tag and then drag and drop by pressing the bottom most right corner of the cell, which will prompt to add 'n' number of variables based on how many cells you have dragged across.
	Like it? Rate it!
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users mdstu_71 Eduardo_2020

1/14/2013 7:09 AM	Rate (0)
Rudrani Posts: 163 Rating: (4)	Thank u.
Rudrani Posts: 163 Rating: (4)
Suggestion To thank Quote Answer

1/14/2013 7:40 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating: (231)	rudrani Thank u.
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on