Default Header
(header konnte nicht geladen werden)
Navigation
Rating 
Thanks 1
6 Entries
| 1/28/2013 7:51 AM | |
Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating:
|
Hello ramzi140, For which have a look at this FAQ - In STEP 7 (TIA Portal) V11, how can you scale integer values in real numbers and real values in integer numbers for analog measurements? |
|
Like it? Rate it! |
|
| 1/28/2013 10:39 AM | |
|
Posts: 11 Rating:
|
Hello ramzi140, For which have a look at this FAQ - In STEP 7 (TIA Portal) V11, how can you scale integer values in real numbers and real values in integer numbers for analog measurements? thank for the replay but do i have to scale the input from 4-20 mA to 0-20 mA then use this way ,or this wayis enough. regards
|
| 1/28/2013 10:46 AM | |
|
Joined: 8/31/2010 Last visit: 12/6/2025 Posts: 1525 Rating:
|
thank for the replay but do i have to scale the input from 4-20 mA to 0-20 mA then use this way ,or this wayis enough. regards Hello ramzi140, What do you mean by "but do i have to scale the input from 4-20 mA to 0-20 mA then use this way ,or this wayis enough."?? Can you explain it in other words. |
|
Like it? Rate it! |
|
| 1/28/2013 11:09 AM | |
|
Posts: 11 Rating:
|
i mean if i use this method it will be enough or not . because i read in some article that in the analog signal should convert it from 4-20 mA to 0-20 mA . thank
|
Follow us on