Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

two Plc and a Hmi

Created by: fausto1964 at: 2/20/2013 5:51 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/20/2013 5:51 PM	Rate (0)
fausto1964 Posts: 4 Rating: (0)	Hello, I have a configuratione with 2 Plc S7-1200 and an Hmi KTP1000 all connected with ethernet. There are two plc with the same program because the request of redundancy: if the 1st fail the 2nd will work instead. When I change a parameter from Hmi I work with the memory of the 1st plc... it's possible to copy automatically all the memory from the 1st to the 2nd when a parameter change ? regards Fausto
fausto1964 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

2/20/2013 6:25 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/8/2026 Posts: 10247 Rating: (1183)	Something like http://support.automation.siemens.com/WW/view/en/67653385

Suggestion To thank Quote Answer

2/21/2013 11:31 AM	Rate (0)
fausto1964 Posts: 4 Rating: (0)	thank you ... I'll try today
fausto1964 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on