Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

SCL Function compilation problem after update from v11 to v12

Created by: harvi at: 4/12/2013 12:22 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

4/12/2013 12:22 PM	Rate (0)
harvi Posts: 9 Rating: (0)	Hello, we've updated Tia portal form v11 to v12 and now is not possible to compile followed function. On v11 works without problem, nothing were changed in project, only update to Tia v12. How to fix it? Tia v12, Step7 Basic CPU 1200 Attachment 2013-04-12_121727.jpg (372 Downloads)
harvi Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

4/12/2013 5:11 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 12/31/2025 Posts: 16342 Rating: (2521)	harvi Hello, we've updated Tia portal form v11 to v12 and now is not possible to compile followed function. On v11 works without problem, nothing were changed in project, only update to Tia v12. How to fix it? Tia v12, Step7 Basic CPU 1200 Time & DINT are not compatible datatypes. Do your DINT_TO_TIME(x) instead of just using x for doing math on time. Or, DINT_TO_TIME(TIME_TO_DINT(y)+dint_x)). Be aware in version 11 of the portal, I am surprised you got it working as I did not have the same luck.
	science guy
Suggestion To thank Quote Answer

5/2/2013 9:20 AM	Rate (0)
harvi Posts: 9 Rating: (0)	Hello, solved with type conversion, thanks for an advice.
harvi Posts: 9 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

|

Share this page:

Share this page on...

Follow us on