Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Error during convert DWORD to DINT

Created by: Faster_s at: 5/3/2013 10:10 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/3/2013 10:10 AM	Rate (0)
Faster_s Posts: 7 Rating: (0)	Hello. I got same problem in TIA portal v11 sp2 upd5. I got 6ES7 138-4DA04-0AB0 in rack. Its programmet like in it manual. I can read and write data to module. The counting data is OK. Format of the data is DWORD. In my aplication it can count up and down fron 0. Everi thing is OK, when it count down (to - values [ looks like FFFF 2458 or something else]), but when it count up PLC get error from convertor. I use converter in my programm to convert DWORD to DINT for the compare this value in outher place in programm. Converter can use only BCD32 to DINT, as you know. The problem are after conversation. IF counter show 16#00002458, after converter it also show 2458, but should 9304. How can i fix this problem or how can you help me?
Faster_s Posts: 7 Rating: (0)	Last edited by: CS Moderator at: 5/5/2013 11:30 PM new subject after splitting from /tf/WW/en/Posts/73449#top
Suggestion To thank

5/5/2013 11:32 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/9/2026 Posts: 4114 Rating: (195)	closed cause question posted twice. The second thread with the subject 6ES7 138-4DA04-0AB0 - when it count up PLC get error from convertor is published within the conference Decentral Peripherie. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on