Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Embedding Variable Tag values in Alarms / Events

Created by: Navnag at: 7/7/2013 3:46 PM (3 Replies)

Rating (1)

Thanks 3

4 Entries

7/7/2013 3:46 PM	Rate (0)
Navnag Platinum Member Joined: 11/21/2007 Last visit: 12/8/2025 Posts: 2326 Rating: (309)	Hello Experts There used to be a facility in Protool and Protool-Pro that we could embed Tag values in Alarms / event messeges. Is it possible to have a similar feature in WinCC Advanced / WinCC Flexible ? e.g. in case of a Temperature High Alarms, can we also embed the actual temperature in the alarms. Thanks Navnag
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

7/7/2013 3:49 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	Yes, you can.
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Navnag

7/7/2013 4:21 PM	Rate (0)
Navnag Platinum Member Joined: 11/21/2007 Last visit: 12/8/2025 Posts: 2326 Rating: (309)	Thanks IBN-Service I have not worked much on WinCC Advanced (TIA) so far but at first glance I could not figure out this feature. I will have a re-look .. maybe I missed the fiture. Cheers Navnag
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

7/7/2013 4:25 PM	Rate (1)
IBN-Service Posts: 8946 Rating: (1000)	Just insert the requested Tag in the message, nearly same procedure like in ProTool. You also can insert more than one tag in a message.
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Navnag Tomy Master

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on