Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Installation of wincc rtm advanced v12 sp1 failed

Created by: Spiz at: 8/2/2013 9:32 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/2/2013 9:32 AM	Rate (0)
Spiz Posts: 13 Rating: (0)	Hello everyone Just tried to install the SP1 vesion of wincc runtime advanced V12, on windows-7 64bit pc, and I get a message that the V12 of this is not installed. Thing is that it is installed and it it running ok. Anybody has any idea? Maybe I do something wrong? Mind you that the rest of the V12 SP1 software was installed ok(S7 proff and Wincc adv) Thanks for your attention One more thing . The runtime button in the TIA is not enabled for me to use.Only the simulation is active Thanks
Spiz Posts: 13 Rating: (0)	Last edited by: Spiz at: 8/2/2013 9:39 AM
Suggestion To thank Quote Answer

8/2/2013 10:24 AM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 3/26/2025 Posts: 1319 Rating: (176)	The SP1 for WinCC RUNTIME Adv. needs an installed WinCC Runtime Adv - which you obviously do not have installed. The point here is: after installation of WinCC Advanced V12 (Engineering), there is indeed an entry for WinCC Runtime Adv. in the installed software. But this is due to the RT Simulator which comes with the Engineering. So if you installed SP1 for WinCC Adv and STEP 7 you do not need the SP1 for RT as long as you do not have installed a WinCC Runtime package seperately.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

8/2/2013 10:35 AM	Rate (0)
Spiz Posts: 13 Rating: (0)	Thanks so much Any idea where I can find this software? I dont seem to be able to find it, and it was not included in the package we got from siemens. Thanks a lot Spiros
Spiz Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

8/2/2013 10:40 AM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 3/26/2025 Posts: 1319 Rating: (176)	The question is: Do you need it? Do you just want to simulate the Panel - than the simulation is available with the engineering. Otherwise you need to buy it if not yet done. Contact your local sales representative.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

8/2/2013 10:44 AM	Rate (0)
Spiz Posts: 13 Rating: (0)	Now I got it slow but got there Thanks my friend
Spiz Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on