Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

ET's 200S

Created by: Bonacho at: 7/18/2007 11:47 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/18/2007 11:47 AM	Rate (0)
Bonacho Posts: 6 Rating: (0)	Hy, i have 11 ET's 200S connect to a CPU 416 - 2DP, and all the ET's have the error (PWR_FLT and IO_FLT), and no led's are iluminated. The value off RET_VAL change off (28673, 28674 and 35). On the Hardware Diagnosis this error not appears. Any body cant hell me. Thanks.
Bonacho Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

7/18/2007 1:36 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hi, did you supply the Power Modules of the ET 200 S with the suiteable power? Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

7/18/2007 7:04 PM	Rate (0)
Bonacho Posts: 6 Rating: (0)	Yes i did.
Bonacho Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

7/19/2007 9:58 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Dear Bonacho, what is the DP Slave Diagnostics saying in STEP 7? I have checked the Manual once again and the only point to have the Head module without error and the Power module showing an error would be that you use the wrong Voltage with the PM. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on