Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

struct or udt to faceplate

Created by: Oscar_83PL at: 8/12/2013 12:51 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/12/2013 12:51 PM	Rate (0)
Oscar_83PL Bronze Member Joined: 10/22/2008 Last visit: 9/10/2025 Posts: 377 Rating: (5)	Hello, I am looking for solution how to assign a struct/udt to faceplate in wincc v12 professional. In PLCI have a udt My_UDT: Input_1 int Input_2 int Output_1 int Output_2_int In DB I created tag MyUDT_TagMy_UDT For Function block it is easy to assign UDT as InputOutput value. But next step is to assignMyUDT_Tag to faceplate in WinCC, and I have no idea how to do that. What do you do if you have many same devices to control? best regards

Suggestion To thank Quote Answer

8/13/2013 1:46 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Have a look in this link for faceplate and udt. http://support.automation.siemens.com/WW/view/en/68014632 Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on